|
|
- MPEG4
- 2-Channel full D1 real-time video / audio
- PoE / 12V DC
- Tampering Alarm
- USB storage recording
- Support GPS, GV-GIS
- Support UMTS/ 3G / 3.5G
- Support Wiegand reader
- Support over 40 branded speed dome protocols
|
GV-VS02A
is a powerful MPEG4 Video Server with compact size and
supports multiple applications. It supports PoE, and 2-channel
full D1 real-time video and audio encoding, fully
integrated with GV-NVR to form the most powerful IP
solution. It also supports over 40 branded speed dome
protocols to fulfill various project demands. It can
record video to a local USB storage, forming the
smallest video recorder. With GPS and UMTS/3G/3.5G
support, it provides GIS solution integrated with GV-GIS.
It can also active Tampering Alarm alerts when a
tampering event happens to prevent crime events.
|
 |
|
SPECIFICATIONS |
Video |
Video
Standard |
NTSC, PAL |
Video
Input |
2 channels |
Compression |
MPEG4 |
Frame Rate
(at Full D1 resolution)
|
NTSC |
30 fps per channel; 60 fps in total |
PAL |
25 fps per channel; 50 fps in total |
Resolution |
Full D1, Half D1, CIF, QCIF |
Video
Streaming |
Configurable frame rate and bandwidth,
Constant and variable bitrate, |
Video
Adjustment |
Brightness, Contrast, Hue, Saturation, Image
Quality,Image Size, Bitrate, GOP (Group of
Picture) size |
Audio |
Audio
Input |
2 channels |
Compression |
G.723 |
Management |
Event
Management |
Trigger |
Schedule, Time, Sensor Input, Motion Detection |
Action |
Store Video (AVI format),
Email with captured images,
Captured images uploaded over FTP,
Monitoring by Center V2, VSM and GV-GIS,
Relay outputs to control external devices |
Firmware
Upgrade |
Remote upgrade by HTTP,
Firmware upgrade utility included in the Software
DVD |
Storage |
Mass storage through USB (optional) |
Client
PC Requirements |
Microsoft IE 6.x or above running on Windows
2000/XP/2003/Vista |
Security |
IP address filtering |
Network |
Interface |
10/100 Base-T Ethernet,
802.11b/g, 802.11n Wireless LAN (optional) |
Protocol |
HTTP, TCP, UDP, SMTP, FTP, DHCP, NTP, UPnP,
DynDNS, Multicast |
Connector |
Video
Input |
BNC 2 ports |
Audio
Input |
RCA 2 ports |
Audio
Output |
RCA 1 port |
Terminal
Block |
4 digital inputs, 4 relay outputs, RS±485, 1
Wiegand interface,
1 UART interface |
Ethernet |
RJ-45, 10/100 Mbps |
USB
2.0 |
2 ports |
Power |
Power Jack |
1 DC-In power jack, 1 DC-Out power jack |
Input |
100-240V, 1.2A, 50-60 mHz |
Output |
12V, 3A, (36W Max.) |
Power over Ethernet |
PoE Standard |
IEEE 802.3af Power over Ethernet / PSE |
PoE
Power Supply Type |
End-Span |
PoE
Power Output |
Per Port 48V DC, 350mA. Max. 15.4 watts |
Alarm |
Sensor
Input |
4 inputs |
Alarm
Output |
4 outputs |
Environment |
Operation
Temp. |
-20 ~ 55 °C / -4 ~ 131 °F |
Humidity |
0 ~ 85% RH (non-condensing) |
Physical |
Dimensions
(L x W x H) |
174 x 145 x 40 mm / 6.85 x 5.7 x 1.57 in |
Weight |
0.74 kg / 1.63 lb (Net) |
*Note: Product design and specifications
are subject to change without notice.
** Note: The maximum number of
connections to the GV-Video Server is 20. When one
GV-System connects to one GV-Video Sever, it takes up to 4
connections. When users connect to one GV-Video Server
through browser, it takes up to 2 connections. When users
operate the Camera/Audio Control on Center V2, it takes 1
connection. |
|
Options |
Optional devices can expand your GV-Video
Server's capabilities and versatility. Contact your dealer
for more information. |
GV-GPS Receiver |
GV-GPS Receiver is a Global Position
System receiver, allowing you to perform vehicle
tracking and location verification functions. It
is available in two types of interfaces: UART and
RS-232. |
GV-Reader |
GV-Reader includes transmit-receive antenna and
electronics. With both Wiegand and RS-485 outputs,
it is compatible with any standard access control
panel. |
GV-Relay V2 |
Working with this module, GV-Video
Server can drive the loads of relay outputs over 5
volts. |
GV-Storage System |
The iSCSI storage system allows you to record
files over the Internet. |
|
|